XTC Plug & Play Power Control System (4 Switches)
4 Switch Power Control System
XTC Power Products Leads the way in UTV Wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System). Unlike other switch systems available, the Power Control System’s designed with the installer in mind. Every PCS has a vehicle specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions.
Power Delivered
The PCS includes 1 x 30 amp and 3 x 20 amp high current circuits on relays with Diode protection. The design reduces voltage spikes from field collapse, protecting LED lights and other sensitive accessories. Additionally included is a fuse block that protects the circuits and comes with an eight gauge power cable and fuses. Most UTV charging systems produce anywhere from 40-70 amps. Because of this, a 50 amp circuit breaker at the battery safely supplies power to the PCS. Installing a 100+ amp high power switch system is not practical in a UTV.
The Power Control Systems Barrier Strip
Pro wiring installers have been using barrier strips in off-road vehicle builds for years. Some good reasons would be aesthetics, along with ease of use when adding new connections and troubleshooting down the road. Each screw point on the barrier strip has a different colored wire that corresponds with the fuse box and switches harness wires. Therefore the 1st rocker switch would be the large 30 amp grey wire, and then so on and so forth.
Switch System Power Harness Configurations
The PCS-44-MAV switch harness has two rocker switch positions that mount in the center console between the driver and passenger. Additionally, one rocker switch mounts in the center dash and a last switch that can mount next to the steering wheel or center dash. Also, the rocker switches can be installed together in any custom way deemed fit by the installer as well. Moreover, a Molex connector links the switch harness to the main Power Control System.
Fitment
Can-Am
- Can-Am Maverick R 2024 - 2025
- Can-Am Maverick X3 2017 - 2025
Polaris RZR
- Polaris RZR 900 2016 - 2025
- Polaris RZR XP 1000/Turbo 2014 - 2023
Yamaha YXZ
- Yamaha YXZ 2017 - 2025
XTC Power Products (About)
XTC Power Products is a company that specializes in the manufacture of aftermarket parts and accessories for UTVs. XTC offers a vast variety of products, including UTV switches, automatic turn signal kits, wiring switch systems, and turn signal kits specifically designed for Polaris RZR, Polaris Ranger, Can-Am Maverick X3, Can-Am Defender, Honda Talon, Kawasaki KRX, and many other UTV models. These products are designed to enhance the functionality and safety of UTVs, making them easier and safer to operate. If you are looking to upgrade your UTV with turn signals or other accessories, XTC Power Products may have the products you need. RZR Turn Signal Kit, X3 Turn Signal Kit, Yamaha RMax Turn Signal Kit, or XTC's vast offering could be the perfect addition.