SuperATV Polaris RZR 900 Complete Heavy-Duty Transmission | UTVSource.com
A Complete Transmission
You’re not the kind of rider to slow down when you face a challenge. The best way through is to put the pedal down and go—until you blow your OEM transmission. Install SuperATV’s Heavy-Duty Complete Transmission on your Polaris RZR 900. It’s better than your stock tranny so you can ride hard without dealing with slipped gears or transmission problems. With perfectly meshing gears, a beefed-up case, and completely upgraded internals, this transmission pushes as hard as you do.
A Better Reverse Chain
Stock RZR transmissions run with a weak single reverse chain that breaks often. Ours uses a double chain that’s nearly twice as strong as OEM. You can throw it in reverse in thick mud and steep inclines without worrying about popping it.
Pinion and Snorkel Gears That Know How to Part
Our pinion and snorkel gear set is the toughest you can get. They’re made with 9310 alloy steel—one of the toughest gear materials on the planet. They’re perfectly lapped, which is a fancy way of saying they’re already broken-in together. You get cool, quiet, and smooth performance from the first ride. Combine that with the 200M front output shaft, and you know this transmission won’t pull any punches.
Beefed Up Pinion Bearing Retainer
There’s a fatal flaw in stock Polaris RZR transmissions that you might overlook—the pinion bearing retainer. The weak OEM one lets your pinion gear pull away from the snorkel gear. When that happens, they can chip teeth and grenade out the side. Our bigger, beefier pinion bearing retainer doesn’t let that happen.
A Rock Solid Case
The transmission case holds everything together. If it flexes at all, gears could strip and you're left without a functioning RZR 900. Ours is thicker and stronger. With 68% more metal around the OEM weak points of the snorkel tube and axle output, it’s a case you can count on. Plus, we added support ribs and gussets to further stiffen and cool the transmission. We made sure it’s a transmission case that will take you anywhere.
Choose Your Gear Reduction
This transmission comes with the option to run a stock, 12.5%, 25%, or 37.5% gear reduction so you have the torque and more power you want. Extra torque will have you jumping off the line quicker, pulling through mud or over hills easier, and turning bigger tires like they’re stock.
FEATURES
- Complete, assembled, drop-in transmission
- Built to order and thoroughly tested
- Upgraded snorkel gear set
- Pinion shaft and gears made with 9310 heavy-duty steel
- Front output shaft made with 300M
- 2.5x stronger than stock
- Lapped gears are mated perfectly for less wear and smoother operation
- Strengthens the entire drivetrain
- Upgraded reverse chain
- 2x stronger than stock
- Quieter than the competition
- Upgraded transmission case
- More support ribs and gussets than stock
- Extra fins help keep your transmission cool
- 68% more metal reinforcing the snorkel tube and axle output areas
- Multiple gear reductions available
- Stock gear reduction
- 12.5% gear reduction
- 25% gear reduction
- 37.5% gear reduction
- Does not include turf mode
FITMENT
- Polaris RZR 900 : 2015-2020
- Polaris RZR S 900 : 2015-2020
- Polaris RZR 4 900 : 2016-2018
NOTE
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
ADDITIONAL INFO
Take your utility vehicle's off-road capability to the extreme with a complete heavy-duty transmission upgrade. These heavy-hauler transmissions replace the entire stock unit with a significantly stronger and more robust assembly engineered for abuse. Upgraded components like triple-cone inners, billet shafts, and high-temp belts increase torque capacity and heat dissipation. Heavy-duty cases, gears, and bearings prevent failures from oversized tires and lift kits. Many utilize lower gear ratios for increased low-end grunt. These transmissions transform your UTV's drivetrain into an indestructible force ready to conquer the gnarliest rock crawling, mud bogging, towing, and other punishing off-road conditions without breaking down. Gain maximum off-road performance and reliability with a premium complete heavy-duty transmission upgrade.
SuperATV (About)
SuperATV is a reputable company known for its expertise in manufacturing high-quality aftermarket parts for UTVs. With a strong commitment to innovation, durability, and customer satisfaction, SuperATV has established itself as a reliable provider of top-notch UTV accessories and upgrades. Their extensive range of products includes lift kits, suspension components, wheels, tires, bumpers, winches, and much more.
SuperATV's dedication to quality is evident in their meticulous attention to detail and use of premium materials. Each product is designed and engineered to withstand the demands of off-road adventures, ensuring exceptional performance and longevity. Whether you're seeking improved handling, enhanced protection, or increased functionality, SuperATV offers a wide array of options to suit your specific needs.
Customers can trust SuperATV for their UTV aftermarket needs due to the company's unwavering commitment to providing reliable, high-quality products. With a team of knowledgeable experts and a focus on customer satisfaction, SuperATV ensures that their parts are not only of the highest quality but also easy to install and backed by excellent customer support.
When it comes to UTV aftermarket parts, SuperATV stands out as a reliable and trustworthy brand, delivering products that enhance the performance, durability, and overall enjoyment of your UTV.