SuperATV Honda Pioneer 1000 Atlas Pro 1.5" Forward Offset A-Arms | UTVSource.com
Dominate with Atlas Pro A-Arms
There it is—the rough, rocky slope none of your buddies can conquer. Before they know what hit them, they’re eating your dust on your way to the top because you're equipped with SuperATV’s Honda Pioneer 1000 Atlas Pro 1.5" Forward Offset A-Arms. These rugged A-arms provide extra ground clearance, stability, and room for new 31” tires on your Pioneer to help you over boulders that hold stock machines back. With these bad boys, you’ll never back down from a hill again.
Bigger and Stronger Than Stock
Atlas Pro A-arms are an upgrade in every way. They’re 0.5” larger than stock and 0.25” larger than our standard high-clearance A-arms. They’re super durable thanks to a UV-resistant powder coating, meaning they’re immune to rust. The larger construction is eye-catching, adding an intimidation factor to your Pioneer. These A-arms ooze confidence and power. You’ll take on the wildest trails with the Atlas Pros easily and make it look good too.
No Hang-Ups with Higher Clearance
These Atlas Pro A-Arms give you an additional 1.5” of ground clearance to keep you from getting stuck. Your wheelbase is also extended, giving you more stability. Additionally, the offset allows you to run 31” tires on your Pioneer without a lift. Obstacles you may have avoided in the past out of fear of hang-ups or losing balance will become bumps in the road with these control arms.
Correct Camber Saves Your Tires
Atlas Pro A-Arms come with fully adjustable pivot blocks. They’re set to factory standards for the fastest installation possible. If you’ve made upgrades to your machine, you can save your tires from unnecessary wear and tear by adjusting your camber. No matter what adjustments you’ve made to your side-by-side, these arms are a perfect addition.
Let SuperATV Do the Work—Preassembly Available!
Want to spend more time on the trails and less time in the garage? Purchase a set of SuperATV ball joints with your A-arms and we’ll install them for you for free! We save you money and time so you can get back to doing what you love.
Keller Ball Joints
Keller Ball Joints use a two-piece design that eliminates the need for a snap ring. They thread onto your A-arms like a nut and bolt, which makes these ball joints virtually impossible to pull out. The high-quality chromoly steel stud combined with an advanced tool-steel body makes them perfect for bigger machines, bigger tires, and bigger rides. And since they’re greaseable and rebuildable, you can keep them running perfectly.
Heavy-Duty Ball Joints
Our heavy-duty ball joints are designed with ultimate performance and convenience in mind. Whether you’re doing flips or chasing hills, our proprietary blend of hardened 4340 VAR steel and zinc plating means this ball joint can take it. Our heavy-duty ball joints also come with easily-accessible grease zerks and an adjustable design. Extensive lab and field testing shows that our heavy-duty ball joints can withstand double the pressure of an OEM ball joint!
FEATURES
- Adds a 1.5” forward offset
- Fit up to 31” tires
- Made with 1.5” diameter tubing
- 0.5” larger than stock
- 0.25” larger than our standard High-Clearance 1.5” Forward Offset A-Arms
- Adjustable lower pivot blocks for full camber adjustability
- Includes high-quality bushings at no extra cost
- UV-resistant powder coat finish
- Easy to install
- Backed by a lifetime warranty
FITMENT
- Honda Pioneer 1000 : 2016+
- Honda Pioneer 1000-5 : 2016+
- Honda Pioneer 1000 Deluxe : 2016+
- Honda Pioneer 1000-5 Deluxe : 2016+
- Honda Pioneer 1000 Limited Edition : 2017+
- Honda Pioneer 1000-5 Limited Edition : 2017+
- Honda Pioneer 1000-6 : 2023+
NOTE
- Pioneer 1000 or Pioneer 1000-5 Limited Edition Models will require Rhino 2.0 axles
- You may need wheel spacers when running 12” wheels
- If you want to run offset A-arms with our 3" Lift Kit, you must have Rhino Brand Axles. Stock axles will bind.
- Does NOT fit Trail models if using with a lift kit.
- A-Arms with Keller Ball Joints will not work with Portal Gear Lifts
NOTE
- You must re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout.
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
ADDITIONAL INFO
UTV offset A-arms are an upgraded suspension component that increases the front track width and improves steering and handling for utility task vehicles and side-by-sides. These aftermarket A-arm assemblies have increased offset geometry compared to stock arms, moving the wheel mounting points outwards from the vehicle centerline. The wider stance provided by offset A-arms results in higher stability at speed, flatter cornering, and reduced body roll. It also allows fitment of larger tire/wheel packages for added ground clearance. Constructed from strong materials like chromoly steel, offset A-arms can better withstand the forces and impacts of aggressive off-road driving over rough terrain. Installing offset A-arms enhances the UTV's handling performance and capability.
SuperATV (About)
SuperATV is a reputable company known for its expertise in manufacturing high-quality aftermarket parts for UTVs. With a strong commitment to innovation, durability, and customer satisfaction, SuperATV has established itself as a reliable provider of top-notch UTV accessories and upgrades. Their extensive range of products includes lift kits, suspension components, wheels, tires, bumpers, winches, and much more.
SuperATV's dedication to quality is evident in their meticulous attention to detail and use of premium materials. Each product is designed and engineered to withstand the demands of off-road adventures, ensuring exceptional performance and longevity. Whether you're seeking improved handling, enhanced protection, or increased functionality, SuperATV offers a wide array of options to suit your specific needs.
Customers can trust SuperATV for their UTV aftermarket needs due to the company's unwavering commitment to providing reliable, high-quality products. With a team of knowledgeable experts and a focus on customer satisfaction, SuperATV ensures that their parts are not only of the highest quality but also easy to install and backed by excellent customer support.
When it comes to UTV aftermarket parts, SuperATV stands out as a reliable and trustworthy brand, delivering products that enhance the performance, durability, and overall enjoyment of your UTV.