Hot Seat Torsional Secondary Springs for Polaris ATV Clutches
These are our original steel springs as used in our Polaris clutch kits prior to the introduction of our H5 springs- they will fit Polaris button type secondary clutches as used on many models from the 80's to present (not for Roller or Team Secondary). Hot Seat clutch springs are made from double shot-peened chrome silicon wire for the highest quality, longest lasting steel springs available. The secondary springs have offset tabs and have higher side pressure than OEM springs for less belt slippage.
Available Rates:
- HSP Purple Spring pn 10050 50/75 lbs @ 2.5"/1.375"
- HSP Orange Spring pn 10070 30/70 lbs @ 2.5"/1.375"
- HSP Black Spring pn 10090 20/50 lbs @ 2.5"/1.375"
Note
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov See Proposition 65 Information for more on this Consumer Product Exposure Warning for residents of California.
These items are intended for closed-course competition only. Alteration of emissions-related components can constitute violation of federal and/or state laws. Substantial fines and penalties can result if used for other than closed-course competition use.