Snorkel Your ATV Can-Am Commander 800/1000 MAX (4 Seater) Warrior Riser Snorkel Kit
Description
DESCRIPTION
Our Warrior Riser Snorkel Kits Come Standard with Removable Warrior Wear Tips That Snap-in Easily and Unsnap Easily for Cleaning. Although They Are Not Required to Use with The Warrior Riser, You Will Have Them If and When You Need Them. They Are Easily Cleaned Reusable and Durable for Long Time Use. The Water Repellent Material Is from Outerwears. Your Warrior Wear Will Come Unglued So You Have the Option of Custom Painting or Hydro Graphics Dipping Your Parts to Match Your Machine. Easily Glued with Loctite Stick'N Seal Glue. You May Choose to Glue Them Together with The Water Repellent Pre-Filter Material, Or to Glue them Together Without. Your Choice. The CVT Outlet Should Not Have the Water Repellent Material in Place.
Stop staring at the hole that is too deep for you to ”send it!” A snorkel kit will move your vent tube to a higher level so you can push through higher water levels. Due to the vent tube being moved, the snorkel can provide clean, dry air through the engine and other parts needing venting on ATVs/UTVs such as clutches, differentials, transmission, carburetors, and fuel tanks. Get your machine snorkeled with Snorkel Your ATV Snorkels so you can tackle the deep waters!
FEATURES
- This Snorkel kit comes with our Patented Warrior Risers & removable snap in Warrior Wear Pre filter Tips
- Warrior Wear pre-filter tips come unglued for easy painting and gives you the choice of using the water repellent material or not
- Warrior Risers have built in Vent Line Slots for properly snorkeling the vent lines
- Warrior Risers have side-mounted built-in slide connections for securing and locking your Warrior Risers together cleanly
- Rubber boot connections for easy disassembly
- All SYA Snorkel kits come with detailed instructions and Color pictures for an easy installation
- This is a 2" Snorkel kit
- This kit contains four 2" risers.
- This Snorkel kit has 3 snorkel assemblies. One for each CVT inlet and one for the Air intake, and One snorkel to tie both CVT outlets merging then into one snorkel.
- Comes with Vent lines and connectors
- This is a full and complete snorkel kit
- No Tuning or jetting needed with our kits
NOTE
- You have to cut/trim some plastic to install most Snorkel kits.
- There are no returns or refunds on any brand of snorkel.
FITMENT
- 2016 Can-Am Commander MAX 1000 DPS
- 2016 Can-Am Commander MAX 1000 XT
- 2016 Can-Am Commander MAX 1000 LTD
- 2015 Can-Am Commander MAX 1000 DPS
- 2015 Can-Am Commander MAX 1000 XT
- 2014 Can-Am Commander MAX 1000 DPS
- 2014 Can-Am Commander MAX 1000 XT
- 2017 Can-Am Commander MAX 1000 LTD
- 2017 Can-Am Commander MAX 1000 XT
- 2017 Can-Am Commander MAX 800 DPS
- 2018 Can-Am Commander MAX 1000 DPS
- 2018 Can-Am Commander MAX 1000 LTD
- 2018 Can-Am Commander MAX 1000 XT
- 2018 Can-Am Commander MAX 800 DPS
- 2019 Can-Am Commander MAX 1000 LTD
- 2019 Can-Am Commander MAX 1000 XT
- 2019 Can-Am Commander MAX 800 DPS
- 2020 Can-Am Commander MAX 1000 LTD
- 2020 Can-Am Commander MAX 1000 XT
- 2020 Can-Am Commander MAX 800 DPS