KFI Polaris Ranger Multi-Mount Winch Kit

KFI Polaris Ranger Multi-Mount Winch Kit (UTV-1080-Y)

This kit will allow you to mount your winch on the front or the rear of your Polaris Ranger or Gravely using the stock rear 2" receiver and the supplied front 2" receiver. 

Designed to work with the following winches

(Note: This mount requires a roller fairlead bracket that comes with most of the winches out there.  If your winch kit did not come with a fairlead bracket you will need KFI part#100495 for Standard 3.00"x4.875" bolt pattern winches and#100695for Wide 3.00"x6.60 bolt pattern winches.

• KFI: ST17 / S2000 / A2000 / A2500-R2 / A3000 / U45-R2 / U45w-R2 / SE25 / SE35 / SE45-R2 / SE45w-R2

• KFI:  AS-50 / AS-50w

• WARN:A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce

• WARN:RT15 / RT25 / RT30 / XT15 / XT25 / XT30

• WARN:Vantage 2000-3000lbs / Provantage 2500-3500lbs

• WARN:RT40 / XT40

• WARN:Vantage 4000lbs / Provantage 4500lbs

• RAMSEY : ATV2500 / ATV3000

• SUPERWINCH : Terra25 / Terra35 / Terra 45 / LT2000 / LT2500 / LT3000

• MILE MARKER :PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500

• MASTER LOCK :1500lbs #2955AT

• Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.

• CYCLE COUNTRY :Work Power 1500 and 2500 / Powermax 2500 and 3500

• BADLAND :2000lb #68146

• Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.

• Listed models come with incorrect ATV roller fairleads

• BADLAND :3000lb #68145 / 5000lb #68144

• CHAMPION :C10013 / C10014 / C10018 / 10020 / 10024 / 12053 / 12503 / 13501(requires rollers) / 14061

• CHAMPION :14501 / 14551 / 14552 / 40252 (4500lbs)

• CHAMPION :10028 / 10032 / 12001 / 12002 / 13001 / 20049 / 20051 / 20249 / 30045 / 30145

• Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF

• Listed models come with incorrect ATV roller fairleads

• CHAMPION:14001 and 14061

• SMITTYBILT :XRC 2.0

• Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.

• Listed models come with incorrect ATV roller fairleads

• SMITTYBILT :XRC 3.0

• XGEAR:  X3000 / X4000

• 4-Hole Standard (3.00" x 4.875" bolt pattern)

• KEEPER CORP. TRAKKER :KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000C

• VENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series)

• All with 3.00" x 4.875" bolt pattern mount-up

• All with 3.00" x 6.600" bolt pattern mount-up

• Possibly many others with the below standard mounting patterns, call to confirm.

• 4-Hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)

• 4-Hole WIDE (3.00" x 6.60" bolt pattern with rollers that are 6.600" or 6.000" bolt pattern)

• 2-Hole (3.10" with rollers that are 4.875" bolt pattern)

Specifications

• 100% MADE IN USA
• Constructed of 3/16" steel
• Unlike all other competitors, our products are metal bead blasted before they are powder coated for the best possible finish prep.
• Powder coated black for supreme durability
• Complete installation instructions included
• All mounting hardware included
• Satisfaction guaranteed
• Roller fairlead and winch not included

Kit includes the following

• (1) Front upper 2" receiver that mounts in the location shown in the picture (#101080)
• (1) 2" Receiver Winch Mount (#100620)
• (1) 20" Quick Connect that gets wired to your winch leads (#QC-20)
• (1) 48" Quick Connect that goes from your winch contactor to the front of your Ranger (#QC-48)
• (1) 120" Quick Connect that goes from your winch contactor to the rear of your Ranger (#QC-120)
• (1) Standard 5/8" Hitch Pin

FITMENT