GGB Exhaust Arctic Cat Wildcat XX 1000 UTV Stainless Trail Muffler
The GGB Wildcat XX 1000 Trail muffler is constructed from 304 stainless steel and is a direct bolt on muffler that gives a deep tuned exhaust note, close to stock dB levels in the mid and high RPM’s and does not require a fuel programmer. The Trail Muffler provides an increase in exhaust flow resulting in 1-3 HP gain with increased torque. Each system is a direct bolt-on fit and allows all factory body panels to be re-installed. Submersion in mud and water will not affect the integrity or the performance of the GGB Trail muffler as its fully welded stainless steel design with ZERO packing is built to withstand the punishment. The GGB Trail muffler is a direct bolt-on, zero maintenance exhaust system that can be run with or without a programmer. The Trail Series will easily meet J1287 sound regulation of 96dBA.
This muffler has been SPECIFICALLY designed for this machine, tested and tuned accordingly to provide optimal exhaust flow and back pressure to allow the engine to efficiently achieve peak power with the stock programmer. There is NO DRONE with our Trail Muffler. The GGB Wildcat XX 1000 Trail Muffler with Bypass Pipe has an incredible tuned sound to it. Slightly louder than stock at idle for that head turning start up. As the RPMs increase the Trail Muffler reduces sound, keeping measured dB levels close to stock through the middle and upper RPM range while providing a deep tuned exhaust note from idle to wide open throttle. Our design allows for reduced operating temperatures and weight savings compared to stock.
In hand you will notice the build quality and fit and finish of the product we deliver, and installation is straight forward as each system is a direct bolt-on using factory mounts and all necessary hardware is included.
Performance Without the Insanely Crazy Noise!
GGB has done a tremendous amount of research in creating their SxS exhaust line. The number one complaint they found with UTV owners was they wanted to run an aftermarket exhaust but couldn't find one that wasn't too loud. Forums are littered with lightly used mufflers for sale due to drone, the wife didn't like, it, too loud etc...
The GGB Trail Muffler is a direct bolt-on muffler that installs easily and requires no modifications or programmers. It produces a finely-tuned exhaust note like no other muffler out there. No more drone, no more returning or selling mufflers after a family outing because it's too loud on rides.
Features
- Built entirely from 304 Stainless Steel
- ZERO packing material
- ZERO Maintenance
- Sound will not change over time
- High flow, low sound output
- Designed to be run with stock programmer
- Reduces operating temperatures
- Deep tuned exhaust note throughout the entire RPM range
- Direct bolt-on using original mounts and OEM connectors.
- Dyno tested and tuned
- Performance gains you can feel
- USFS approved spark arrestor
- Quality engineered and built
- Lightweight
- Brushed finish
Details
Weight
Stock Muffler: 16.30 lbs
GGB Trail: 10.45 lbs
Weight Savings: 5.85 lbs
Decibel Levels:
Stock Decibel: Idle- 85-86 / 3500 rpm - 91 / 5000 rpm - 96
GGB Decibel: Idle- 86.5 / 3500 rpm - 92.6 / 5000 rpm - 96.5
Fitment
- 2018 Wildcat XX LTD EPS/XX RG XT EPS
- 2019 Wildcat XX LTD EPS/XX XT EPS
- 2020-2024 Wildcat XX EPS
- 2022-2024 Wildcat XX SE EPS
- 2023-2024 Wildcat XX Black Hills
GGB Exhaust (About)
GGB Exhaust Technologies Inc. specializes in designing and manufacturing high-performance exhaust systems and mufflers that cater to a wide range of vehicles, including snowmobiles, ATVs, UTVs, and marine applications. GGb's products are known for enhancing performance, reducing weight, and delivering a distinctive sound without compromising quality. GGB Exhaust mission is simple, make the highest quality exhaust systems available and provide the best customer service and warranty to back them up.