SSV Works Universal RGB Cage-Pod Tweeters: Highs That Hit Hard

SSV Works - Cage-Mounted Plug-and-Play UTV Tweeters with RGB Lighting

If you're serious about sound in your UTV, it's time to pay attention to the details—like your highs. SSV Works just dropped a first-of-its-kind product in the powersports audio space: The SSV Universal 1-Inch Cage-Pod Tweeters with RGB Ring. These aren’t your average tweeters. They’re clean, compact, and designed to give your ride that crisp top-end sound that cuts through engine noise, wind, and trail chatter.

Whether you're upgrading an existing SSV Works system or building a custom setup, these cage-mounted tweeters are plug-and-play and made to be seen and heard. Let’s get into why they matter and what makes them a game-changer for off-road audio systems.

Why Add Tweeters to Your UTV Audio System?

A lot of UTV audio systems crank out solid mids and lows, but the high-end frequencies are often where things fall flat—especially in loud environments like sand dunes, open desert, or trails at speed. That’s where tweeters come in. They focus on handling the high frequencies (think vocals, cymbals, and details), delivering clarity and sharpness that full-range speakers just can’t match alone.

The SSV Works Universal Cage-Pod Tweeters take this a step further by making them easy to mount and wire into your ride with zero fabrication.

Built for the Cage, Not the Dash

This is the first cage-mounted tweeter solution in the industry, and it's exactly what it sounds like: tweeters that clamp straight to your roll cage using a universal system. That means no drilling, no cutting panels, and no sketchy mounting solutions.

Included Clamp Sizes:

• 1.5”

• 1.75”

• 1.85”

• 2”

These sizes cover pretty much all common UTV cage diameters, so you're set no matter what you drive.

Plug-and-Play Compatibility

If you're already running an SSV Works audio system, installation is as easy as it gets. These tweeters include a plug-and-play harness that integrates directly with SSV's existing kits—no splicing, no guesswork. But even if you’re not using an SSV system, the Universal Cage-Pod Tweeters can still be wired into custom setups.

That flexibility makes them a solid choice whether you’re rocking a factory-style audio setup or building something custom from scratch.

RGB Accent Lighting: Clean Looks, Day or Night

You’re not just getting clean sound—you're getting clean looks too. Each pod includes a built-in RGB ring around the tweeter for added style. These RGBs integrate with your existing lighting controller to match the rest of your setup, or you can wire them independently if you just want that subtle glow.

They’re low-profile, but they stand out—especially once the sun goes down.

Sound Specs That Matter

SSV Works isn’t playing around here. These pods may be compact, but the sound specs speak for themselves:

Tweeter Performance:

• Tweeter Size: 25mm

• Peak Power: 100 watts

• RMS Power: 50 watts

• Impedance: 4 ohm

• Sensitivity: 88dB

• Frequency Response: 1.5kHz – 20kHz

• Built-in Crossover: 5.5kHz @ 12dB/Octave

That wide frequency response means you’re getting high-end clarity without distortion. The built-in crossover makes sure only the right frequencies go to the tweeters, so you don’t get any mid-range bleed or harshness.

Product Overview

Here’s what’s included in the box:

• (2) Tweeter Pods w/ Tweeters Installed

• Plug-&-Play Harness for SSV Systems

• Universal Clamp Kit (1.5”, 1.75”, 1.85”, 2”)

• RGB Ring Lighting Integration

• Patent-Pending Design

Total weight is just 1.7 lbs, and the compact size (8” x 7” x 4”) means they tuck in tight wherever you want them on your cage—no bulk, no mess.

Perfect Pairing: Add-On for Existing Systems

SSV Works built these with add-on potential in mind. If you’re already running one of their overhead or dash-mounted speaker pods, or a subwoofer in your rig, these tweeters complete the sound stage. You’ll immediately notice more detail and definition in your music, especially when you’re moving at higher speeds or riding with helmets.

This is the final piece to take your audio from loud to clean.

Who This SSV Tweeter For

These aren’t beginner speakers—but they’re beginner-friendly. Whether you're running a Can-Am, Polaris, Honda, Yamaha, or anything with a cage, these mount up clean and wire in easy. They're a must-have for:

• Riders who already have mids and bass dialed but want more clarity

• Anyone running an SSV Works system looking to round out the sound

• Custom audio builds where clean installation is key

• People who want their rig to look as good as it sounds—with or without music playing

The Missing Link in UTV Audio

SSV Works has been doing audio in the off-road world for years, and this product proves they’re still pushing boundaries. The Universal Cage-Pod Tweeters fill a gap nobody else has touched—letting riders add top-end sound and LED style with minimal install time.

No cutting. No custom mounts. Just solid, sharp highs and a clean look that stands out.

Available Now at UTV Source

You can grab the SSV Works Universal 1-Inch Cage-Pod Tweeters with RGB Ring right now on . As a direct distributor of SSV Works products, we’ve got them in stock and ready to ship.

Buy the SSV Works Universal Tweeters – $229.99