Description
AJK Offroad Mounting Plates, each 4 hole mounting plate is designed to stand up to the toughest off road conditions. Every plate is CNC laser cut for a fine uniform finish along the outside edges.
Based on your sizing option selected, the mounting plate allows a 1.50″ or 1.75” inch tubing to pass through center, so you’re able to weld from either side of the plate. The four holes along the perimeter of the mounting plate will accept a ⅜” bolt. The mounting plate measures 3 ½” square and is ¼” thick. These 4 hole mounting plates work great for mounting rock slides, roll cages, motor mounts, or anything else to your frame. Can also be be used to sandwich your floor pan between your roll cage and your frame.
Features
- Made from 1010 plate steel, sold individually
- 3.5” square
- ¼” thick
- Accepts ⅜” bolt
- Based on your sizing option selected below, the mounting plate allows a 1.50″ or 1.75” inch tubing to pass through center
Additional Information
| Inside Hole diameter | 1.50", 1.75" |
| Weight | .75 lbs |
| Dimensions | .25 × 3.5 × 3.5 in |
Specifications
